* Wireless Technology – Uses radio frequency to both transmit and receive messages about a hazard in the home; when one alarm sounds, all will sound.

* This Battery Unit Power – Enables homeowners to expand a current interconnected system.

* Also can be used in homes with existing hardwired only smoke alarms to create an interconnected system.

* Battery units provide protection during power outages.

* 85 Decibel Alarm – Alerts residents to deadly smoke and fire. Loud enough to wake most sleeping adults when placed in bedrooms and outside of sleeping areas.

* Smart Touch Button – One touch quickly and temporarily silences nuisance alarms activated by any alarm in the system; will hush a low battery chirp for up to 12 hours; will test the operation of the alarm and interconnected system.

* The red LED will flash in conjunction with the alarm beep, and flash during a smoke alarm, a low battery mode and a unit error. The unit shall incorporate one green LED to indicate the alarm’s current status and mode of operation.

* The green LED will indicate one of four (4) conditions: Standby Condition – The LED will flash approximately every 10 seconds. Initiating Alarm Indicator – The LED will flash every second while sounding an alarm to signify that the alarm sensed a smoke hazard. Alarm Memory Condition – The LED will flash every second signifying that the alarm sensed a smoke hazard. It will continue to flash every second until the test/reset button is pressed, thus resetting the alarm.* Hush® Mode Condition – The LED will flash every 2 seconds while the alarm is in Hush® Mode.